-
AASHTO 249 Standard Thermoplastic Road Marking Paint
Hot melt scribing coating adopts glass bead primer and petroleum resin hot melt coating. Heat the coating in the hot-melt machine, control the melting temperature between 18 ° C and 220 ° C, and fully stir for about 10 minutes before coating. Mark and measure the position according to the position and figure indicated in the design drawing, and then apply the primer on the way of marking. Hot melt coating can be applied only after the primer is dry. Reflective glass beads are spread while mar... -
BS 6008 Standard Thermoplastic Road Marking Paint
Thermoplastic road marking paint consists of resin,EVA,PE wax ,fillers materials,glass bead,which is solid powder condition at normal temperature,If is is heated to 180-200 degrees by heat fusing pot under construction,it will appears flowage, coating pot under construction, it will appears flowage, coating the paint to the road surface will form hard film,It has full line type,strong wearing resistance and other flowage, Sprinkling reflecting glass micro beads on the surface under consturction, it has good reflecting effect at night , it is widedy applied in highway and road,Accordning to the enviroment used and the different construction requirements,we can supply different types of paint for our customer option.
-
JTT280-2004 Chinese Standard Thermoplastic Road Marking Paint
Thermoplastic road marking paint is mainly used for more than 2 level road and highway.The thickness of lines made from this coating is (1.0 ~ 2.5) mm, paint mixed with reflective glass beads, and in the construction, spread the reflective glass beads on the surface. This type of marking line has good nightly reflective performance, long service life, generally up to 2 ~ 3 years.
Thermoplastic road marking paint needs special heater device in constructions. In second re-marking construction of old marking lines, you should eliminate the thick old marking line firstly.
-
Convex White Yellow Thermoplastic Road Marking Paint
Convex vibrating thermoplastic road marking paint is made of thermoplastic petroleum resin, high-quality pigments and additives. Using it to mark line, the thermoplastic road marking paint has the advantages of quick drying, easy construction, good light reflection and long service life.
We can produce different standards of thermoplastic road marking paint, such as Chinese standard (JT/T280-2004 and GB16311-2009), BS standard, AASHTO standard, etc. The contents and raw materials are different with different standards. We can also produce according to customers’ non-standard customization.
-
Normal White Yellow Thermoplastic Road Marking Paint
Thermoplastic road marking paint consists of resin,EVA,PE wax ,fillers materials,glass bead,which is solid powder condition at normal temperature,If is is heated to 180-200 degrees by heat fusing pot under construction,it will appears flowage, coating pot under construction, it will appears flowage, coating the paint to the road surface will form hard film,It has full line type,strong wearing resistance and other flowage, Sprinkling reflecting glass micro beads on the surface under consturction, it has good reflecting effect at night , it is widedy applied in highway and road,Accordning to the enviroment used and the different construction requirements,we can supply different types of paint for our customer option.
With the increasing social demand of glass micro-beads ,the increasing of manufacture .and the relatively low price and not standardized quality ,we choose the manufacturer with economic strength according to the our big usage and customize the bloomed glass micro-beads used for road line-marking according to the standardized quality requirement .Three specifications :the surface sprinkling beads for thermoplastic line-marking ,the surface sprinkling beads for normal temperature line-marking ,the surface sprinkling beads for water-base line-marking.We can supply enough stock in hand ever day.
-
Vietnam Customized Thermoplastic Road Marking Paint
We can produce different standards of thermoplastic road marking paint, such as Chinese standard (JT/T280-04 and GB16311-09), BS standard, AASHTO standard and so on. The contents and raw materials are different with different standards. We can also produce according to customers’ non-standard customization.
-
Philippines Customized Thermoplastic Road Marking Paint
Thermoplastic reflective road marking paint is made of thermoplastic petroleum resin, high-quality pigments and additives. Using it to mark line, the thermoplastic road marking paint has the advantages of quick drying, easy construction, good light reflection and long service life.
-
Custom Color Thermoplastic Road Marking Paint
Hot-melt reflective marking coating is mainly used for the highway and highway above grade 2, the marking coating thickness of this coating system is (1.0 ~ 2.5) mm, coating mixed with reflective glass beads, and in the marking construction, the surface sprinkled reflective glass beads. This kind of marking line has good night to glance performance, service life is longer, the demand that depends on the big highway construction of traffic flow estimates to coating of coating of all kinds of road marking line, small and the quality of coating itself and decide, can reach commonly (2 ~ 3) year. The construction of hot melt coating requires special heating equipment. To the old line of the second recoating, to eradicate the thicker the old coating can be applied.
-
AASHTO 249 Standard Thermoplastic Road Marking Paint
Hot melt scribing coating adopts glass bead primer and petroleum resin hot melt coating. Heat the coating in the hot-melt machine, control the melting temperature between 18 ° C and 220 ° C, and fully stir for about 10 minutes before coating. Mark and measure the position according to the position and figure indicated in the design drawing, and then apply the primer on the way of marking. Hot melt coating can be applied only after the primer is dry. Reflective glass beads are spread while marking to increase night identification.
-
Cold Solvent Road Marking Paint
Cold solvent road marking coatings are generally produced from thermoplas- tic resins such as acrylic resin,alkyd resin and polyester resin. Among them, the marking paint based on high polymer acrylic resin is the most widely used cold solvent road marking paint in the world.Our cold solvent road marking paint is a road marking paint prepared with modified acrylic resin as base material. The marking with it as raw material has the characteristics of hard paint film, fast drving and wear resis... -
Tow-Component Road Marking Paint
Two component material is the best pavement material in the world at present The material is mainly poly methyl meth acrylate (PMMA),which has the characteristics of safety and environmental protection，fast curing，strong adhesion，firmness and durability simple construction and so on.Moreover its toughness is good acid and alkali resistance，aging resistance，UV resistance and weather resistance are strong.The color anti-skid pavement is rich in color，which is suitable for anti-skid...
